Digitrak System
Digitrak System - An electronic instrument used to determine the position and strength of electro- magnetic signals emitted from a transmitter sonde in the pilot head of a drilling/boring system, Sometimes referred to as a Walkover System.

Available from our offices in East Sussex

Eclipse


The DigiTrak Eclipse® system is revolutionary for the HDD industry. It is the first of its kind to display the drill head location and locate points in a "real-time" bird's-eye view making it the easiest "walkover" system on the market to learn and operate.

The Eclipse also features:

  • Patented technology makes it both fast and very accurate.
  • All new systems are dual frequency capable. Older systems can be upgraded.
  • All transmitters are sewer grade with pitch readings in 0.1% increments.
  • The locating frequency was chosen specially due to the lack of interference present at that frequency level.
  • Programmable target depth and remote steering function.
  • Advanced features such as tension monitoring and magnetic steering tool capabilities available as upgrades.

For more information, see the below

Eclipse Dual Frequency instructions
Eclipse specifications
Eclipse


Remote Display


The Remote Display lets you see drilling information at the drill. Equipped with externally mounted antennae.


Battery Charger


The DigiTrak Battery Charger re-charges your NiCad batteries with a quick charge feature.


Eclipse Transmitters

There are a variety of transmitters available for use with our Eclipse series locators including battery and cable units. Go to the transmitters page for more information.


Eclipse® SST™ Advanced HDD Guidance System

The DigiTrak® Eclipse® SST™ advanced HDD guidance system is easy to use, and it delivers quick and accurate steering data. The system eliminates the need for a DC wire grid and its lengthy setup time. Due to the small size of the SST™ transmitter, tight turning radii can be achieved.

The SST™ system monitors the tool’s compass heading (azimuth) in degrees and provides the operator with a lateral deviation (in degrees) from the intended path for quick steering corrections.

With the Eclipse® receiver and remote display, the operator can view real-time position and depth data. A laptop computer also graphically displays the tool’s progress in real time. It shows both a profile view of the bore and a bird’s-eye view of the lateral deviation.

Mark V

The dual frequency DigiTrak Mark V utilizes the industry's lowest frequency for optimum rebar penetration. Advanced circuit design effectively combats active interference and increases pitch/roll speed and range. Features include:

  • Dual-frequency receiver and transmitter.
  • Effective interference rejection.
  • Look-ahead™ locating provides location, depth, pitch, and roll of transmitter in drill head, in addition to transmitter battery and temperature status.
  • Target-in-the-box™ locating technique.
  • Easy-to-learn locating technique that leads you to the transmitter or locate point.
  • Enhanced locating features are built upon an accurate, proven design.
  • Smooth auto-gain changes are transparent to the operator.
  • Display shows real-time movement of the transmitter to allow "on-the-fly" locating.
  • Patented calibration procedure offers superb accuracy and the ability to recalibrate while drilling.
  • Remote left/right steering capability.

For more information, see the below:

MK5 specifications
MK5

Remote Display


The Remote Display lets you see drilling information at the drill.

Battery Charger


The DigiTrak Battery Charger re-charges your NiCad batteries with a quick charge feature.

Transmitters


There are a variety of transmitters available for use with the Mark V series locators - please contact our sales office to discuss your requirements.
   

Home | About Us | Technical Information | Contact Us | Site Search

Please contact T A Drilling Ltd at
Sidney Little Road, Churchfields Ind Est. St Leonards on sea, E/Sussex TN389PU
Phone +44 (0) 1424-854-112 | Fax +44 (0) 1424-854-231