American Augers DD- 140B

Compare These Features To Those Of Any Other Drill...

• MANUFACTURED by the world’s most experienced builder of directional drills.
• THRUST/PULLBACK rating of 140,000 lb (622.7 kN). HIGH ROTARY TORQUE turns very large reamers in long bores (25,000 ft-lb, 33,895 Nm).
• RACK AND PINION thrust/pullback, two-pinion drive.
• CATERPILLAR diesel power.
• CLAMP & WRENCH can be repositioned within 60” range for most convenient make up and break out.
• ADJUSTABLE TORQUE LIMITER for rotary and makeup force.
• ADJUSTABLE FORCE LIMITER for thrust and pullback.
• REAR DOWNRIGGER hydraulic thrust stabilizers.
• INDEPENDENT CONTROLS and hydraulic circuits for thrust/pullback, torque and auxiliary operations permit simultaneous full power operation.
• WIRELINE COMMUTATOR for speedy hookup of wireline guidance equipment has terminals at driller’s console.
• TRACK MOUNTED with on board engine FIELD PROVEN PIPE HANDLING with remote control hydraulic crane.
• FACTORY DIRECT SERVICE for fast support by knowledgeable technicians.
• MATCH UP WITH MUD SYSTEMS designed and built by American Augers such as the MP-300 or MP-400. These systems have integral mixing, cleaning and pumping capability, and enough capacity for mud motor work and use of large reamers.

Click here to download technical specifications

American Augers DD- 330

Compare These Features To Those Of Any Other Drill...

• MANUFACTURED by the world’s most experienced builder of directional drills.
• 150 METRIC TONNES (330,000 lb) thrust/pullback force.
• HIGH ROTARY TORQUE turns very large reamers in long bores (48,000 lb ft, 65,000 Nm).
• RACK AND PINION thrust/pullback, two-pinion drive. PIPE SUPPORTS, hydraulically operated.
• INDEPENDENT CONTROLS and hydraulic circuits for thrust/pullback, torque and auxiliary operations permits simultaneous full power operation.
• ADJUSTABLE TORQUE LIMITER for rotary and makeup force.
• CATERPILLAR diesel power. ADJUSTABLE FORCE LIMITER for thrust and pullback.
• WRENCH/CLAMP SEPARATION 0-12 inches (0-305 mm), travels full length of rack.
• TRAILER MOUNTED on air ride suspension, highway legal load. WIRELINE COMMUTATOR for speedy hookup of wireline guidance equipment with terminals at driller’s console.
• REAR MOUNTED mud swivel, 3 inch (76mm) water course.
• ES!LOK LOCKOUT SYSTEM is available.
• ALSO AVAILABLE mounted on steel tracks or skid. DRILLER’S CABIN with heat, air conditioning.
• FACTORY DIRECT SERVICE for fast support by knowledgeable technicians.

Click here to download technical specifications

American Augers DD- 580

World-class design...because every job counts!

• 580,000 lb (263 tonnes) of thrust/pullback power
• 65,000 ft-lb (88,000 Nm) of rotary torque easily turns large reamers in long bores 900 hp (672 kW) Caterpillar® diesel power
• 3.75 inch ( 95mm) fluid course permits flow up to 850 gpm (3,200 liters/min)
• Floating Spindle™ allows simple, reliable makeup and breakout
• Pipe Hog™ triple jaw wrenches travel for precise alignment to pipe joints
• Quik Change Die Holders™

• Wiggle Steer™

• Factory direct service for fast support by knowledgeable technicians
• ES!LOK® exit-side lock out
• Rack & pinion four (4) pinion drive with adjustable force limiter
• Wireline commutator for speedy hookup of wireline guidance equipment with terminals at driller's console
• Independent controls and hydraulic circuits for thrust/pullback, torque and auxiliary operations permits simultaneous full power operation
• Driller's cabin with heat and air conditioning

American Augers DD- 880

World-class design...because every job counts!

• 880,000 lbs (400 tonnes) of thrust/pullback power
• 88,500 ft-lb (120,000 Nm) of rotary easily turns large reamers
• 1200 hp (894 kW) Cat® diesel power
• 3.75 inch ( 95mm) fluid course permits flow up to 850 gpm (3,200 liters/min)
• Floating Spindle™ allows simple, reliable makeup and breakout
• Pipe Hog™ triple jaw wrenches travel for precise alignment to pipe joints
• Quik Change Die Holders™
• Wiggle Steer™
• Factory direct service for fast support by knowledgeable technicians
• ES!LOK® exit-side lock out system is standard equipment
• Rack & pinion six (6) pinion drive with adjustable force limiter
• Wireline commutator for speedy hookup of wireline guidance equipment with terminals at driller’s console
• Independent controls and hydraulic circuits for thrust/pullback, torque and auxiliary operations permits simultaneous full power operation
• Driller’ cabin with heat and air conditioning

American Augers DD-Million-Eighty

World-class design...because every job counts!