| ASTEC UNDERGROUND |  |
| ASTEC UNDERGROUND DD-6 DD-6 This self contained directional drill is the only directional drill in its class with the River Rig Pedigree®, design features proven on the toughest trenchless jobs all over the world. You can count on performance, durability, and low down time, the keys to profitable operation! Compare These Features To Those Of Any Other Drill...
Plus
|
|
| ASTEC UNDERGROUND DD-8 The DD-8™ American Directional Drill® is manufactured by the world's most experienced builder of large directional drills. With a 230 hp Caterpillar® diesel engine, the DD-8™ can handle the toughest conditions. The DD-8's full 2" fluid course permists high volume mud flows, a necessity for mud motor and large reamer operations. Its high rotary torque will spin reamers through the longest bores.Compare These Features To Those Of Any Other Drill...
|
 |
| The Astec® EarthPro™ Series DD-65 The Astec® EarthPro™ Series DD-65 MiniMax horizontal directional drill from Astec Underground offers power and versatility in a compact package. This unit is small enough to work among obstacles in existing landscapes or in tight work areas such as against walls or buildings. This unit offers 6,000 lbs of thrust/pullback force and is capable of up to 500 ft-lbs of rotary torque, with a maximum rotary speed of 180 rpm. It weighs a nimble 2,600 pounds (1179.3 kg) for minimum impact on turf and existing landscape. The patented Es!Lok system is integrated into the drill controls. An emergency shut down switch is located at the driller’s console. Powered by a dependable 26-horsepower Caterpillar® C1.1 diesel engine, the DD-65 has an onboard duplex mud pump that can pump 5 gallons per minute at 650 psi. This unit features the field-proven single rack-and-pinion carriage drive. It uses 5-foot drill stem with an outside diameter of 1.75 inches and can carry up to 150 feet of pipe.
|
|
The Astec® EarthPro™ Series DD-1215 The Astec® EarthPro™ Series DD-1215 horizontal directional drill from Astec Underground offers innovative features plenty of drilling power in a compact size for use among obstacles such as existing landscape and buildings. The DD-1215 offers 12,000 lbs of thrust/pullback with up to 1,500 ft-lbs of rotary torque with maximum rotary speed of 200 rpm. The drill weighs 8,500 lbs. (3,855 kg) fully loaded and is 50.5 inches (1.28) wide. Powered by a 65-horsepower Cummins B3.3C diesel engine, it features an onboard mud pump that pumps 15 gallons per minute at 1250 psi. This drill has the field-proven dual rack-and-pinion carriage drive that has made American Augers’ the market leader. The floating carriage has two speeds, including a 120 ft/min fast mode. The DD-1215 uses 10-foot drill stem and can carry up to 400 feet of pipe. The pipe greaser and state-of-the-art rod loader are standard, as are the floating open-top vise wrenches. The ergonomic operators’ station includes microprocessor-controlled electronic readout for all functions. The patented Es!Lok system is integrated into the drill controls, and there is an additional strike alert system for added safety. |
|
The Astec® EarthPro™ Series DD-3238 The Astec® EarthPro™ Series DD-3238 offers contractors the power and features of a much larger unit with the mobility and flexibility to fit onto any jobsite in any environment. The DD-3238 provides 32,000 lbs of thrust/pullback force with the capability of up to 3,800 ft-lbs of rotary torque. The maximum rotary speed can reach up to 225 rpm. The drill weighs 20,000 lbs., and is 247 inches long by 89 inches wide. The DD-3238 is powered by a 125-horsepower John Deere turbocharged diesel engine. It also has an onboard FMC mud pump that can pump up to 47 gallons per minute at up to 1500 psi. This new drill also boasts the field-proven dual rack-and-pinion carriage drive that has made American Augers’ maxi-rig drills the market leaders. The floating carriage is capable of two speeds, including a 120 ft/min fast mode for adding and removing rods. The DD-3238 uses 10-foot drill stem and can carry up to 500 feet of pipe. The powered pipe greaser and state-of-the-art rod loader are standard features, as are the floating open-top vise wrenches. The ergonomic operator’s station includes a microprocessor-controlled electronic readout for all the function gauges. The LCD screen is backlit and has function key operation for quick and easy view of all critical drill functions. It also offers both a drill mode and machine diagnostic screen for quick and easy information gathering. The multi-function single joystick controls all drill functions, and the comfortable, adjustable seat helps combat operator fatigue. In addition, the DD-3238 offers independent rear stabilizers, and a single-drive stake down system that can put down up to four stakes if necessary, and offers optional rock augers. It has a tethered travel control unit to help operator visibility during tramming and transport, and the improved front-drive track system offers traction and balance. The patented Es!Lok system is integrated into the drill controls, and there is an additional strike alert system with a voltage sensor for added safety. The sleek new look and style of the DD-3238 comes through with the new front and rear hood design that allows easy, ground level access to the engine and hydraulic systems. The drill’s mud pump is also covered by the rear hood for added protection and curb appeal. |
|
Home | About Us | Technical Information | Contact Us | Site Search
Please contact T A Drilling Ltd
at
Sidney Little Road, Churchfields Ind Est. St Leonards on sea, E/Sussex
TN389PU
Phone +44 (0) 1424-854-112 | Fax +44 (0) 1424-854-231