| AMERICAN AUGERS |  |
American Augers 24-100 Dependability For Boring Contractors The model 24-100 is a light, easy to handle unit with rugged construction and dependable performance. It meets the challenge of most any bore in the small to medium range, 4 to 24 inch diameter, and develops 100,000 pounds of forward thrust. Powered by the 26 HP Lombardini 2-cylinder air-cooled diesel, the model 24-100 uses a rugged unitized box frame construction for lasting alignment of the transmission and gearbox. We have never had a frame failure in over 25 years of boring machine production. The low center-line and wide stance ensure low machine profile and stability. Slide rails guide the 24-100 on sturdy reinforced tracks. The rails pivot, releasing the boring machine from the tracks for a balanced lift of 2,300 pounds. Spring loaded track dogs automatically reposition the push bar for the next drive. Machine controls and gauges are clustered for easy operation. The machine has electric start and emergency switch for total machine shutdown. The clutch and transmission shift levers move easily without strain. The spring loaded spoil chamber door protects from thrown debris. Vivid graphics guide safe and proper operation. |
|
| American Augers 24-150 American Augers Model 24-150 Muscles Through Tough Jobs This lightweight, low profile machine is rugged, yet powerful and dependable. It’s ready for those utility construction jobs from 4-inch fiber optic ducts to 24 inch utility lines. It handles the really tough jobs with muscle to spare. The Model 24-150 uses the DEUTZ air-cooled diesel engine. The maximum working torque is over 22,000 ft. lbs at the auger drive. The high volume hydraulic pump delivers up to 23 GPM to three 4-inch cylinders developing 150,000 lbs maximum forward thrust. American Augers’ unitized box frame construction provided solid, lasting alignment of the power train. We have never had a frame failure in over 25 years of machine production. The low center-line and wide stance profile ensures a stable machine. Quik/Split design separates the boring machine into units for lighter, faster lifts into and out of the pit. The semi-automatic push bar securely locks the track dogs for a solid push. Machine controls are clustered for easy operation. The 24-150 has an electric starter and an emergency switch for total machine shutdown. Warning lights monitor alternator charging and engine oil pressure. The tachometer, fuel and hydraulic system gauges are in direct view. The clutch and shift levers are easily handled without strain. A spring loaded spoil chamber door deflects thrown debris. Vivid graphics guide safe and proper operation. |
 |
American Augers 30-225 Supplies Over 112 Tons Of Thrust The American Augers model 30-225 Boring Machine provides full boring range from 4 inch to 30-inch diameter utility casings. Breezes through small jobs or muscles full capacity bores with power to spare. A dependable Deutz diesel engine is coupled to a four-speed transmission and high ratio planetary gearbox. A high volume hydraulic pump supplies three hydraulic cylinders, which develop 225,000 pounds of thrust to drive casing the full distance. The rugged box frame construction with the gearbox bolted to the header wall assures lasting alignment of the power train. We have never had a frame fail in over 25 years’ production of auger boring machines. The machine’s wide stance and low centerline assure machine stability. We have provided portholes in the frame to permit servicing the drive train. Cam rollers on the main frame and hook arms guide the machine smoothly along the track. A track brake keeps the machine from creeping while idling. Quik-Release hook rollers easily release the machine from the track. True Quik/Split design separates the machine into sections for lighter lifting in and out of the pit. The 30-225 has an electric starter and an emergency switch for total machine shutdown. Warning lights monitor engine oil pressure and the alternator. The tachometer, fuel and hydraulic system gauges are in direct view. The clutch and shift levers are easily handled without strain. A spring loaded spoil chamber door deflects thrown debris. Vivid graphics and signs guide safe and proper machine operation. |
|
| American Augers 36-340 Optimum Boring Power In A Compact Package The American Augers model 36-340 Boring Machine gives you more power and more torque to get the job done, but in a package that is lighter to lift. It’s designed to offer you the optimum power package without excess machine weight. A dependable Deutz diesel engine is coupled to as four-speed transmission and high ratio planetary gearbox. A high volume hydraulic pump supplies three hydraulic cylinders which develop 340,000 pounds of thrust to drive casing the full distance. The rugged box frame construction with the gearbox bolted to the header wall assures lasting alignment of the power train. We have never had a frame fail in over 25 years’ production of auger boring machines. The machine’s wide stance and low center line assure machine stability. We have provided portholes in the frame to permit servicing the drive train. Cam rollers on the main frame and hook arms guide the machine smoothly along the track. A track brake keeps the machine from creeping while idling. Quik – Release hook rollers easily release the machine from the track. True Quik/Split design separates the machine into three components for lighter lifting in and out of the pit. The 36-340 has an electric starter and an emergency switch for total machine shutdown. Warning lights monitor engine oil pressure and the alternator. The tachometer, fuel and hydraulic system gauges are in direct view. The clutch and shift levers are easily handled without strain. A spring loaded spoil chamber door deflects thrown debris. An optional hydraulic push bar actuator provides easy machine advance. Vivid graphics and signs guide safe and proper machine operation. |
|
American Augers 36-600T The Performance You Expect From American Augers! For rugged power in a compact package and a broad
boring capacity from 12 to 36 inch casing diameter, contractors
choose the American Augers 36-600. The proven four cylinder Deutz
turbocharged diesel engine is coupled to a five speed transmission
and planetary gear box. The load sense piston hydraulic pump supplies
38 GPM at 6,000 PSI to two hydraulic cylinders to develop 600,000
pounds of forward thrust. The secondary hydraulic pump supplies
the push bar lock and winch, and provides for faster cylinder retraction. The 36-600 has an electric starter and an emergency switch for total machine shutdown. Warning lights monitor engine oil pressure and the alternator. The tachometer, fuel and hydraulic system gauges are in direct view. The clutch and shift levers are within easy reach. A spring loaded spoil chamber door deflects thrown debris. Vivid graphics guide safe and proper operation. |
|
| American Augers 42-600 Dependable Boring Performance For Crossings Up To 42 Inches In Diameter The model 42-600 boring machine gives solid performance day in and day out. Now with the water-cooled Deutz turbo diesel engine, there is higher horsepower, higher torque and less noise. This rugged machine can deliver torque over 116,000 ft-lb! There is 600,000 pounds of forward thrust to drive casings from 12 to 42 inches. American Augers’ unitized box frame construction provides for faster lasting alignment of the power train. In over 25 years of boring machine production, we have never had a frame fail. The low centerline and wide stance create a low machine profile. True Quik-Split design allows the machine to separate into sections for faster, easier lifts into and out of the pit. Machine controls are clustered for easy operation. The 48-600 has and electric starter and an emergency switch for total machine shutdown. Warning lights monitor engine oil pressure and the alternator. The tachometer, fuel and hydraulic system gauges are in direct view. The clutch and shift levers are easily handled without strain. A spring loaded spoil chamber door deflects thrown debris. Vivid graphics and signs guide safe and proper machine operation. |
|
| American Augers 42-600G2 The G2 boring machines include a hydraulic/electric
clutch system that allows the operator to shift with ease and maintain
his presence while the auger is in motion. The machine automatically
engages the tracks when set into place so there are no hook rollers
to be fastened down. New hydraulic controls are placed together
for ease of operation and the machine thrust lever features a greatly
reduced force of operation while increasing the amount of proportionality.
New hydraulic pressure controls allow the operator to maintain a
constant face pressure on the cutting head. |
|
| American Augers 48-900 Big Machine Features With Driveline Torque To Spare! For all the big machine features with a broad
boring range, choose the American Augers 48-900. The high-torque
turbocharged Deutz diesel engine is coupled to a heavy-duty gearbox
which delivers over 116,000 ft-lbs! The 48-900 will make bores from
12 to 48 inches with power to spare. The radial piston hydraulic
pump supplies 38 GPM at 6,000 PSI to three hydraulic cylinders to
develop 900,000 pounds of forward thrust. The secondary hydraulic
pump supplies the push bar lock and winch, and provides for faster
cylinder retraction. American Augers’ unitized box frame construction
provides for faster lasting alignment of the power train. In over
25 years of boring machine production, we have never had a frame
fail. The low centerline and wide stance create a low machine profile.
True Quik-Split design permits the machine to separate into sections
for faster, easier lifts into and out of the pit. Machine controls
are clustered for easy operation. The 48-900 has and electric starter
and an emergency switch for total machine shutdown. Warning lights
monitor engine oil pressure and the alternator. The tachometer,
fuel and hydraulic system gauges are in direct view. The clutch
and shift levers are easily handled without strain. A spring loaded
spoil chamber door deflects thrown debris. Vivid graphics and signs
guide safe and proper machine operation. |
 |
| American Augers 48-900G2 The G2 boring machines include a hydraulic/electric clutch system that allows the operator to shift with ease and maintain their presence while the auger is in motion. The machine automatically engages the tracks when set into place so there are no hook rollers to be fastened down. New hydraulic controls are placed together for ease of operation and the machine thrust lever features a greatly reduced force of operation while increasing the amount of proportionality. New hydraulic pressure controls allow the operator to maintain a constant face pressure on the cutting head. The 48-900G2 comes standard with the new Quik-Work feature that removes the middle cylinder from thrusting when the forces are not needed. The simple click of a button on the control lever can gain the operator a 33% speed increase. The 48-900G2 is available with the standard winch
or the highly productive Quik-Trac™ system. The new Quik-Trac
system is a rack and pinion drive that not only allows the machine
to move at a rate of 77ft/min but also develops 10,000 pounds of
thrust and pull force. Using the new Quik-Trac will increase the
overall productivity of your machine by allowing you to pull auger,
add new sections of auger, and push product into casing without
the lost time associated with dogging and connecting the winch. |
|
| American Augers 60-1200 Brawny Boring machine Packs 1.2 Million Pound Thrust! The king of boring machines is the American Augers 60-1200. The six-cylinder turbocharged Deutz diesel engine is coupled to a five-speed transmission and planetary gearbox, which delivers over 129,000 ft-lbs of output, torque. The 60-1200 will make bores from 12 to 60 inches with power to spare. The axial piston hydraulic pump supplies 38 GPM at 6,000 PSI to four hydraulic cylinders to develop 1,200,000 pounds of forward thrust. The secondary hydraulic pump supplies the push bar lock and winch, and provides for faster cylinder retraction. American Augers’ unitized box frame construction provides lasting alignment of the power train. In over 25 years of boring machine production, we have never had a frame fail. The low centerline and wide stance create a low machine profile. True Quik-Split design permits the machine to separate into sections for faster, easier lifts into and out of the pit. Machine controls are clustered for easy operation. The 60-1200 has an electric starter and an emergency switch for total machine shutdown. Warning lights monitor engine oil pressure and the alternator. The tachometer, fuel and hydraulic system gauges are in direct view. The clutch and shift levers are easily handled without strain. A spring loaded spoil chamber door deflects thrown debris. Vivid graphics and signs guide safe and proper machine operation. |
 |
American Augers 72-1200 Brawny machine Packs 1.2 Million Pound Thrust! With a 6-cylinder, 250 hp Caterpillar® 3126B diesel engine and a 6-speed transmission, the 72-1200S™ will deliver 200,000 ft.-lbs. of torque and up to 1.2 million lbs. of thrust! The 72-1200S has a triple-bladed spoil panel for quick removal of high volumes of material, and with the additional power and speed this new machine offers, bores are completed quickly and effectively. Call American Augers today to find out what the top-of-the-line boring machine will do for your bottom line. Top-of-the-line quality with bottom line results! Machine controls, gauges and warning lights are clustered in direct view for easy operation. The clutch and shift levers are easily handled without strain. The 72-1200 has an emergency switch for total machine shutdown. For additional safety, a spring-loaded spoil chamber door deflects thrown debris. |
|
|
|
|
Home | About Us | Technical Information | Contact Us | Site Search
Please contact T A Drilling Ltd
at
Sidney Little Road, Churchfields Ind Est. St Leonards on sea, E/Sussex
TN389PU
Phone +44 (0) 1424-854-112 | Fax +44 (0) 1424-854-231